Mortar rakes screwed directly on angle grinders for mortar raking.
Our mortar rakes comes with an M14 thread to screw directly on the spindle of an angle grinder. The mortar rake has the female M14 thread which fits onto the spindle of a standard angle grinder.

Different working length – mortar raking depth – are available for the mortar rakes: 26 mm, 35 mm, 47 mm and 60 mm. Diameters available for the mortar rakes are 6, 8, 10 12 and 14 mm.

Rivald mortar rakes are available in a selection of different tungsten cutters per mortar rake:  3-cutter, 4-cutter and 6-cutters. For harder mortars should be used a mortar rake with a higher number of cutters.  Thus a 6-cutter for the hardest mortar.  The higher the number of tungsten cutters on a mortar rake – the less vibrations during the mortar raking process.

For dust free mortar raking, use a guide plate. The guide plate It incorporates an elongated channel that follows the raked out mortar line.  This significantly improves dust collection.  The guide plate is equipped with a flex hose, which contributes to the flexibility of connecting to a vacuum cleaner.

https://www.youtube.com/watch?v=owskM4lKY28